Stainless Steel 410 Pipe Manufacturer, Supplier & Exporter in India — Nishra Overseas

Nishra Overseas is a leading Stainless Steel 410 Pipe manufacturer in India, and a dependable 410 Pipe supplier and exporter in India, serving turbine, pump and valve, and general mechanical-strength applications across domestic and international markets. Whether you're sourcing Stainless Steel 410 Pipe in India for a single project or for ongoing supply, our stock depth and manufacturing capability are built to support both.

410 is a fundamentally different kind of stainless steel from the 304/316-family grades most buyers start with: it's martensitic, not austenitic. That single distinction explains almost everything else about it. Because 410 is heat-treatable — it can be hardened by heating to around 1850°F (roughly 1010°C) and then quenching in air or oil — it delivers much higher strength, hardness, and wear resistance than austenitic grades. It's also magnetic in all conditions, unlike 304 or 316. What it trades away is corrosion resistance: with only 11.5–13.5% chromium and no molybdenum, 410 is meaningfully less corrosion-resistant than the austenitic grades, and isn't recommended for severe corrosive service.

Stainless Steel 410 pipe carries a minimum tensile strength of 480 MPa and a minimum yield strength of 275 MPa, with a lower elongation (16% min) than austenitic grades — a direct consequence of its higher strength and hardness. It resists scaling up to about 1200°F (650°C) and is available as seamless pipe, ERW pipe, or electric fusion welded pipe, in sizes from ½" NB up to 24" NB in round form, and up to 100 NB for fusion-welded pipe. As a trusted Stainless Steel 410 Pipe manufacturer, supplier, and exporter in India, Nishra Overseas' goal is straightforward: deliver certified, high-quality 410 pipe and tube at fair, competitive pricing, backed by dependable stock availability.

Table of Contents

1. 410 Pipe Specification
2. Technical Reference Data
3. Available Product Types
4. Indicative Pricing
5. Packaging & Marking
6. Applications
7. Stock Range by Product
8. Manufacturing & Processing Capabilities
9. Stock Availability
10. Dimensions & Pressure Ratings
11. Stainless Steel 410 Pipe Manufacturer, Supplier & Exporter in India
12. Frequently Asked Questions

410 Pipe Specification

• Outside Diameter: 6.00 mm OD up to 914.4 mm OD, with sizes up to 24" NB held ex-stock.
• Wall Thickness Range: 0.3 mm to 50 mm, covering Schedules 5, 10, 40, 80, 80S, 160, XS, and XXS, along with non-standard thicknesses manufactured to order.
• Product Forms: Seamless pipe, ERW (electric resistance weld) pipe, electric fusion welded pipe, cold-drawn tube, and fabricated pipe.
• Shapes: Round, square, rectangular, coiled, "U"-shaped, and hydraulic tubing.
• Length Options: Single random, double random, or cut-to-length. Ends can be supplied plain, beveled, or threaded.
• Surface Finish: 2B, No.4, No.1, No.8 mirror, or electropolished finish, or any finish specified by the customer. End protection is provided using plastic caps as standard.
• Delivery Condition: Annealed and pickled, polished, cold drawn, or heat-treated (quenched and tempered) to the strength/hardness level specified.
• Documentation: Every consignment can be supported by mill test certificates, EN 10204 3.1 reports, chemical and mechanical test reports, PMI reports, visual and third-party inspection reports, NABL-accredited lab reports, and destructive/non-destructive testing records as required.
• Packing: Wooden crates, plastic wrapping, steel strapping, or custom packing per client instruction.
• Sourcing options: Nishra Overseas can supply Indian-origin material or, on request, material of European, Japanese, US, Korean, Thai, or Taiwanese mill origin, depending on the specification and certification your project requires.
• Size range: Round pipe from ½" NB up to 24" NB; electric fusion welded pipe from 6 NB up to 100 NB.

Governing Standards

Because 410 is a martensitic (not austenitic) grade, it is governed by a different family of ASTM/ASME specifications than the 304/316-series grades:

• ASTM A268 / ASME SA268 — Seamless and welded ferritic and martensitic stainless steel tubing, commonly used for 410 heat exchanger and general tubing applications.
• ASTM A731 / ASME SA731 — Seamless, welded, and heavily cold-worked austenitic and ferritic/martensitic stainless steel pipe for general corrosive and high-temperature service.
• ASTM A511 — Seamless stainless steel mechanical tubing, applicable to 410 in mechanical/structural use.
• 410 bar, forging, and plate forms are additionally covered by ASTM A276, A473, and A240 respectively, relevant where pipe is fabricated from other stock forms.

Note: 410 pipe is not produced to ASTM A312, which specifically covers austenitic grades — a distinction worth confirming with your engineer or QA team before referencing a standard on a purchase order.

Technical Reference Data

Chemical Composition (%)

Grade	C (max)	Mn (max)	Si (max)	P (max)	S (max)	Cr	Ni (max)
410	0.15	1.0	1.00	0.040	0.030	11.5–13.5	0.75

No molybdenum and comparatively low chromium versus the 300-series austenitic grades — this is the composition trade-off that gives 410 its strength and hardenability at the cost of corrosion resistance.

Mechanical Properties

Grade	Tensile Strength (min, MPa)	Yield Strength 0.2% Proof (min, MPa)	Elongation (min, %)	Hardness (HRB max)	Hardness (HB max)
410	480	275	16	95	201

Physical Properties

Grade	Density (kg/m³)	Elastic Modulus (GPa)	Thermal Expansion (µm/m·°C, 0–100°C to 0–538°C)	Thermal Conductivity (W/m·K)	Specific Heat (J/kg·K)	Electrical Resistivity (nΩ·m)
410	7750	200	9.9 – 11.6	24.9 – 28.7	460	570

410's thermal conductivity is notably higher, and thermal expansion notably lower, than the austenitic grades — another consequence of its different metallurgical structure.

Cross-Reference to Other Standards

Grade	UNS	Old British	Euronorm No.	Euronorm Name	Swedish SS	Japanese JIS
410	S41000	410S21 / 56A	1.4006	X12Cr13	2302	SUS 410

Available Product Types

Nishra Overseas maintains stock and production capability across a broad selection of 410 forms:

• PVC-filmed 410 pipe and tube
• Hot-rolled, high-luster 410 pipe for decorative applications
• ASTM 410 welded pipe
• Mirror-polished and electropolished seamless 410 pipe
• Bright-finish seamless and welded 410 pipe
• Rectangular 410 pipe, prime quality
• Custom-size welded 410 pipe
• Thin-wall, large-diameter 410 tube
• Capillary and heat exchanger tube
• Schedule 40 seamless 410 pipe
• Cold-rolled seamless 410 pipe
• High-precision 410 pipe
• Coil tube and embossed/colored-finish 410 pipe

Indicative Pricing

Pricing for SS 410 pipe and tube varies by wall thickness, finish, order volume, heat-treatment condition, and current raw-material rates — 410 is generally less expensive than molybdenum-bearing austenitic grades due to its simpler alloy composition. As a general market range:

Product Category	Approximate Range
Standard seamless/welded pipe	US $700 – 3,900 / Ton
Thick-wall / capillary / specialty pipe	US $1,000 – 4,000 / Ton or Kg
Mirror-polished / decorative pipe	US $1,000 – 5,000 / Ton
Piece-rate fittings and small components	US $1 – 80 / Piece

For an accurate, order-specific quotation based on size, schedule, finish, heat-treatment condition, and quantity, please contact our sales team directly.

Packaging & Marking

Standard packaging uses wooden pallets or crates with waterproof paper and plastic wrapping, or seaworthy export packing for larger-diameter pipe, adjusted to match each client's requirements.

Every length of Nishra Overseas 410 pipe is marked along its full length with:

• Nominal pipe size (NB)
• Schedule / wall thickness
• Governing specification and grade
• Method of manufacture (seamless or welded)
• Heat number
• Manufacturer's name or symbol

Test Certification

• Manufacturer's Test Certificate
• IBR Test Certificate (Form III-D)
• Laboratory Test Certificate from a government-approved lab
• Third-party inspection certification, with excise gate pass where applicable for Modvat benefit

Applications

SS 410 pipe from Nishra Overseas is used across:

• Steam and gas turbine components
• Petroleum industry equipment
• Pumps and valves
• Springs, fasteners, brackets, and hardware
• Scraper blades and wear-resistant components
• Heat exchanger tube
• Applications requiring mild resistance to acids, water, air, and food contact (electropolished condition)
• Structurally strong general engineering applications where high corrosion resistance isn't the primary requirement

Because of its lower corrosion resistance relative to austenitic grades, 410 is not recommended for applications involving severe or sustained corrosive exposure — for those, our 304/316-family pages are the better fit.

Stock Range by Product

Nishra Overseas stocks the following 410 product families:

• Shapes: Square pipe · Round pipe · Rectangular pipe
• Finishes: Colour-coated pipe · Ornamental tube · Electropolished pipe
• Fabricated Forms: Handrail tube · Thin-wall seamless tube
• Precision Products: Inner/outer polished pipe · Capillary tube · Seamless tube
• Standards-Referenced Products: AISI 410 seamless pipe · AISI 410 welded pipe · SUS 410 seamless pipe · AISI 410 ERW pipe · UNS S41000 pipe · DIN 1.4006 pipe

Manufacturing & Processing Capabilities

• Structural Cutting — Pipe, tube, tubing, and square/rectangular/round sections cut from 1/16" up to 28" diameter.
• Tubular Cutting — Ornamental tube, tubing, and hollow bar, in the same 1/16"–28" diameter range.
• Production Cutting — Precision cutting for diameters up to 4", carried out on Amada production equipment for tight-tolerance work.
• Structural Polishing — OD and ID polishing available across the full tubular product range.
• Heat Treatment — Quench-and-temper heat treatment available to bring 410 to the hardness and strength level your application requires, followed by air or oil quenching as specified.

Stock Availability

Product Form	OD Range	Wall Thickness Range
General pipe stock	6 mm – 630 mm	0.5 mm – 30 mm
Round pipe (large size)	12.7 mm – 300 mm	0.5 mm – 30 mm
Rectangular pipe	10×20 mm – 100×200 mm	0.5 mm – 30 mm
Standard tube	6 mm – 630 mm	0.5 mm – 30 mm
Polished tube	12.7 mm – 250 mm	0.5 mm – 30 mm
Precision tube	16 mm – 85 mm	0.5 mm – 3.0 mm
Capillary tube	13 mm – 85 mm	0.5 mm – 2.0 mm
Instrumentation tube	20 mm – 200 mm	0.5 mm – 2.0 mm
Hydraulic tube	12.5 mm – 203.2 mm	1.0 mm – 5 mm
Cold-drawn tube	6 mm – 430 mm	0.8 mm – 30 mm

Schedule Availability by Nominal Bore

NB Size	Sch 5	Sch 10	Sch 40	Sch 80	Sch 160
1/8"–3/8"	✓	✓	✓	✓	—
1/2"–4"	✓	✓	✓	✓	✓
5"	✓	✓	✓	✓	—
6"	✓	✓	✓	✓	✓

Dimensions & Pressure Ratings

A note on pressure ratings for 410: Allowable-stress tables for austenitic grades (304/316-family) don't transfer directly to martensitic 410, since the two families behave differently at elevated temperature and are governed by different design standards. If this page is for a pressure-piping application, please confirm allowable stress values against ASME B31.3 (or the relevant design code) for grade 410 specifically, or speak with our technical team — don't reuse a 300-series pressure table for a 410 order. We'd recommend removing a generic pressure-rating table from this page rather than risk it being applied to the wrong grade; happy to help source the correct 410-specific allowable stress data if you need it published here.

Stainless Steel 410 Pipe Manufacturer, Supplier & Exporter in India

Nishra Overseas is a manufacturer, stockist, supplier, and exporter of SS 410 seamless and welded pipes, tubes, and fittings, supplying turbine, pump/valve, and general mechanical-engineering industries, EPC contractors, and trading partners across India and abroad. Whatever stage of the supply chain you're sourcing from, Nishra Overseas covers it end to end.

Stainless Steel 410 Pipe Manufacturer in India

As a Stainless Steel 410 Pipe manufacturer in India, Nishra Overseas produces seamless and welded 410 pipe to the relevant ASTM/ASME martensitic pipe and tube specifications, with non-standard diameters, wall thicknesses, lengths, and heat-treatment conditions made to drawing or specification on request. Every batch is traceable to a heat number, with mill test certificates, EN 10204 3.1 documentation, and third-party inspection available wherever the order calls for it.

Stainless Steel 410 Pipe Supplier in India

As a Stainless Steel 410 Pipe supplier in India, Nishra Overseas holds ready inventory across common and non-standard sizes out of our warehouse, so smaller or urgent orders can be fulfilled without waiting on a fresh production run. Our technical team helps confirm whether 410's strength and hardness profile — rather than an austenitic grade's corrosion resistance — is the right fit for your application before you place an order.

Stainless Steel 410 Pipe Exporter in India

As a Stainless Steel 410 Pipe exporter in India, Nishra Overseas packs every export consignment to seaworthy standard, with documentation prepared in advance for customs clearance in the destination market. We regularly ship 410 pipe and tube to buyers across the Middle East, Southeast Asia, Africa, and Europe, alongside our domestic supply base.

Industries served: Turbine manufacturing, petroleum equipment, pump and valve manufacturing, fastener and hardware production, and general mechanical engineering.

Get a quote: Share your required size, schedule, length, quantity, and required strength/hardness condition, and the Nishra Overseas team — your Stainless Steel 410 Pipe manufacturer, supplier, and exporter in India — will respond with current pricing, lead time, and available certification for your order.